|Usage||Interior Use, Painting Use|
|Application Method||Brush, Roller|
|Packaging Type||Can, Plastic Bottle|
|Packing Size||5 kg and 25 kg|
|Min. Order Quantity||500 Kilogram|
Texture Powder Paint is specially formulated paint for interiors as well as exteriors. The easy-to-apply Texture Powder Paint quickly dries and lasts for years to come. We can provide the Texture Powder Paint in different colors and other specific formulations. Our Texture Powder Paint is good in quality and yet affordable.
Suitable for interior and exterior. It is applied by air compressed spray gun (Texture gun) applied by spray gun with suitable nozzle variable sized bubble texture can be obtained. Available in vide range of colors, of customers choice. Two or more coats of variable size of bubbles can be applied with different colors to get multicolor texture, Granite finish etc. The bubble so obtained can be flattened (Head Cut) to get additional finish of customers choice with suitable acrylic sheet. Over coat with weather care (silicone / acrylic emulsion medium) can be done to achieve sheen finish and weather and water proof property.
White cement based water proof, algae, fungal resistant texture finish. Applied with various types of rollers (Netloop, Texture, Fibre) to give varities of designs. Available in powder form with vide range of colour.
Ready mixed dry plaster based on white cement, natural stone aggregates with suitable polymer to give stone like finish of elegant, water repellant, weather proof plastering. It is applied by spray plaster machine. After 2 to 3 hours of application of plaster the outer thin coating can be wahsed of with wet sponge, so as to expose the stone clearly. The sponge periodically wetted with water and then wash the surface carefully. Available in vide range of combinations.
Classic Texture Finish
Water Proof Exterior – interior texture finish available in a powder form. Very tough, cost effective and aesthetic – gives the wall as natural finish. Many types of "Texterior" available. Algae, fungi & Mildex resistant plaster.
Surface to be coated must be properly cleaned with water before application. It must be free from algae, Mildew, Fungi, Grease etc., Old paint or loose particle must be removed properly with wire brush, for old walls, after surfac3e preparation use of "Cemprime" is recommended as primer coat. The coating to be painted must be applied over the prime coat before it dry completely. The surface to be plastered must be always wet in condition. While applying the plaster.
For 1 kg of texture product 200ml to 400ml of clean water is mixed (depending upon the type of texture coat) to give proper paste like consistency. Now the paste is ready to apply.
Sandtex type texture is applied with trowel or putty knife of large size. First make the sandtex powder to paste consistency as explained earlier and apply with trowel / Putty knife (12"). Apply gentely on the wet wall vertically / Horizontally / Across to get desired design of your choice. The paste oriented application. Available in vide range of colors.
Duntex is a readymixed acrylic plaster containing Graded Granular Chips, sand, fibers along with fungicides. It should be applied with trowel to give aesthetic grained finish of fine, coarse, varieties, it has good weather and water proof property and excellent surface adhesion. Available in vide range of combinations.
Product (1) to (3) are also available in ready mixed paste like plaster, which are suitable for interior / exterior